Eu Product Disposal; Extra Eu Product Waste Collection; Copyright; Maintenance - Elite Rivo Anleitung

monitor from the roller.
Before any maintenance or cleaning operation,
stop using the home trainer, disconnect it from
the power source and wait at least 20 minutes
so the brake cools down.
• Wipe it with a cloth after every workout to prevent the de-
posit of dust or sweat;
• Do not conduct any cleaning operation on the bicycle or
chain when the bicycle is on the home trainer as the deter-
gents might irreparably damage the bearings or other internal
FR
mechanical parts;
26
• It is possible that after many workouts or after particularly
intense ones the tension of the transmission belt decreases,
this would translate to some skipping;
Belt tensioning must be conducted only with
approval from the Manufacturer.

EU product disposal

This product complies with the EU 2002/95/CE and 2003/108/
CE regulations.
The waste bin symbol on the product or its
packaging indicates that the product must be
collected separately from other waste.
The customer will therefore have to dispose of the
product, at the end of its life cycle, in the proper separate
waste collection areas for the disposal of electronic objects or
give it back to the retailer when purchasing a new equivalent
product with a 1 to 1 ratio.
Proper separate waste collection saves the environment we
live in, its public health and allows for the recycling/ of the
materials it's made of.

Extra EU product waste collection

Please contact the local auhtorities and get info on regula-
tions and waste supply methods if you wish to dispose of
this product.
The Manufacturer cannot be held liable for any
responsibility for damages to the environment
and for the systems used to dispose of the
product or the materials destined to its use.

GENERAL NOTES

Copyright

No part of these instructions can be reproduced or transmit-
ted without written authorization by the Manufacturer.
The product software and its code are exclusive property of
the Manufacturer.

MAINTENANCE

The instructions and its annexes cannot substitute any lack
of understanding or skill by the customer, so anyone who in-
teracts with the product must be sure to properly understand
and elaborate what's in the documentation.

Changes to the products

Any change must be authorized in writing by the Manufac-
turer.
Because of ongoing technical updates, the Manufacturer
reserves the right to modify its products without prior notifi-
cation to the customer for any:
a) modifications that do not hamper the performances of the
product;
b) modifications that are necessary to fulfil or improve pro-
duct specifications;
c) modifications that are necessary in compliance with the
applicable regulations or statutory requirements.
Moreover, the Manufacturer reserves the right to supply pro-
ducts featuring such improvements without any obligation or
responsiblity to make such adjustments to previously mar-
keted products. The Manufacturer also reserves the right to
adjust: costs, labels, models availability and components,
based on the market conditions.
Other than these instructions, you'll find the
following annexes on the bottom of this docu-
ment:

Declaration of conformity

Spare parts catalog
Warranty and release from liability

Assistance card