Connecting An External Amplifier - Yamaha RX-V1800 Bedienungsanleitung

Connecting an external amplifier

This unit has more than enough power for any home use. However, if you want to add more power to the speaker output
or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks.
Notes
• When you make connections to the PRE OUT jacks, do not make any connections to the SPEAKERS terminals.
• Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
• Adjust the volume level of the subwoofer with the control on the subwoofer unit.
• Some signals may not be output at the SUBWOOFER PRE OUT jack depending on the settings for "SPEAKER SET" (see page 77).
• You can use the automatic setup feature even if you use an external amplifier (see page 37).
1 CENTER PRE OUT jack
Center channel output jack.
2 FRONT PRE OUT jacks
Front channel output jacks.
3 SURROUND PRE OUT jacks
Surround channel output jacks.
1 2 3
SURROUND SINGLE(SB)
CENTER FRONT
SUB SUR.BACK/
PRESENCE
WOOFER
PRE OUT
5
4 SUR.BACK/PRESENCE PRE OUT jacks
Surround back or presence channel output jacks. When
you only connect one external amplifier for the surround
back channel, connect it to the SINGLE (SB) jack.
y
• Set the "SUR.B L/R SP" to "LRGx2", "LRGx1", "SMLx2" or
"SMLx1" and "PRESENCE SP" to "NONE" (see page 78) to
output the surround back channel signals at the SUR.BACK/
PRESENCE PRE OUT jacks.
• Set the "PRESENCE SP" to "YES" and "SUR.B L/R SP" to
"NONE" (see page 78) to output the presence channel signals at
the SUR.BACK/PRESENCE PRE OUT jacks.
• When "BI-AMP" is set to "ON" (see page 19), this unit output
the front channel audio signals at the SUR.BACK/PRESENCE
PRE OUT jacks.
5 SUBWOOFER PRE OUT jack
Connect a subwoofer with a built-in amplifier.
4
L
R
Connections
29
En