Connecting Other Components - Yamaha RX-V1800 Bedienungsanleitung

Connecting other components

Make sure that this unit and other
components are unplugged from the
AC wall outlets.
Notes
• When "VIDEO CONV." is set to "OFF" (see page 89), be sure
to make the same type of video connections as those made for
your TV (see page 24). For example, if you connected your TV
to the VIDEO MONITOR OUT jack of this unit, connect your
other components to the VIDEO jacks.
Connecting a Blu-ray Disc or HD DVD player
Connect your Blu-ray Disc or HD DVD player to the HDMI IN 1 jack of this unit to perform the features of the Blu-ray
Disc or HD DVD completely.
indicates recommended connections
indicates alternative connections
HDMI out
Component out
Y P P
B R
HDMI COMPONENT VIDEO
A BD/HD DVD
Y
P
B
P
R
IN1
BD/
HD DVD
• When "VIDEO CONV." is set to "ON" (see page 89), the
converted video signals are output only at the MONITOR OUT
jacks. When recording a source, you must make the same type
of video connections between each component.
• To make a digital connection to a component other than the
default component assigned to each DIGITAL INPUT or
DIGITAL OUTPUT jack, select the corresponding setting for
"OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "I/O
ASSIGNMENT" (see page 86).
• If you connect your DVD player to both the DIGITAL INPUT
OPTICAL and the DIGITAL INPUT COAXIAL jacks, priority
is given to the signals input at the DIGITAL INPUT COAXIAL
jack.
• The short message displays do not appear when the component
video signals with 480p/576p, 720p, 1080i or 1080p resolutions
are input.
Blu-ray Disc or
HD DVD player
Optical out
Audio out
S-video out Video out
V
S
VIDEO
BD/HD DVD
L
R
DIGITAL INPUT
BD/
5
HD DVD
Connections
L R
O
S VIDEO
VIDEO
OPTICAL
25
En