Adjusting The Speaker Level; Enjoying Multi-Channel Sources In 2-Channel Stereo - Yamaha RX-V1800 Bedienungsanleitung

Before performing the following operation, set the operation
mode selector on the remote control to C AMP.

Adjusting the speaker level

You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
Note
This operation will override the level adjustments made in
"Optimizing the speaker setting for your listening room" (see
page 37) and "SPEAKER LEVEL" (see page 79).
Press 2 LEVEL on the remote control
1
repeatedly to select the speaker you want to
adjust.
Display
FRONT L
Front left speaker
CENTER
Center speaker
FRONT R
Front right speaker
SUR.R
Surround right speaker
SB R
Surround back right speaker
SB L
Surround back left speaker
SUR.L
Surround left speaker
SWFR
Subwoofer
PRNS L
Presence left speaker
PRNS R
Presence right speaker
y
• Once you press 2 LEVEL on the remote control, you can
also select the speaker by pressing 3k / n.
• Instead of "SB R" and "SB L", "SB" is displayed if "SUR.
B L/R SP" is set to either "SMLx1" or "LRGx1" (see
page 78).
2
Press 3 l / h on the remote control to
adjust the speaker output level.
• Press 3 h to increase the value.
• Press 3 l to decrease the value.
Control range: –10.0 dB to +10.0 dB
Adjusted speaker
Enjoying multi-channel sources in
2-channel stereo
You can mix down multi-channel sources to 2 channels
and enjoy playback in 2-channel stereo.
Press N STEREO on the remote control
repeatedly to select "2ch Stereo".
y
• You can use a subwoofer with this program when "LFE/BASS
OUT" is set to "SWFR" or "BOTH" (see page 77).
• You can also select the "2ch Stereo" mode by rotating the
N PROGRAM selector on the front panel.
• See page 69 for details about the parameters of the "2ch Stereo"
mode.
Using audio features
53
En