Yamaha RX-V1800 Bedienungsanleitung Seite 98

Saving and recalling the system settings (SYSTEM MEMORY)
Example 3: Saving the sound
configurations for specific sources
The desired sound configurations are different for each
input source. For example, if you use the sound field
program "Village Vanguard" for a music source of a live
jazz performance, the parameter settings may differ when
the input source is a vinyl record or an SACD. You can
store the sound settings for each input source.
SYSTEM MEMORY 1
The "Village Vanguard" program configured
for the SACD sources
SYSTEM MEMORY
2
1
CLASSICAL LIVE/CLUB ENTERTAIN
5
6
SYSTEM MEMORY 2
The "Village Vanguard" program configured for
the vinyl record sources
Saving each setting
y
See page 64 for the sound field program parameter settings.
1
Start playback of the desired live jazz
performance recorded on the SACD.
2
Set the sound field program to "Village
Vanguard" and then adjust the parameters
for the current playback sources.
Press and hold M SYSTEM MEMORY 1 for
3
4 seconds.
This unit stores the current sound field program
settings to "MEMORY1".
4
Change the input source to "PHONO" and
then start playback of the desired live jazz
performance recorded on the vinyl record.
5
Adjust the sound field program parameters
for the current playback source.
Press and hold M SYSTEM MEMORY 2 for
6
4 seconds.
This unit stores the current sound field program
settings to "MEMORY2".
96
En
3
4
MOVIE
8
7
Example 4: Switching multiple audio and
video synchronization settings
If you use two different kinds of video monitors or
projectors, and these components are not compatible with
the automatic audio and video synchronization feature,
you should set "MANUAL DELAY" for each component.
You can switch between the different "MANUAL
DELAY" settings by using the MSYSTEM MEMORY
buttons.
SYSTEM MEMORY 1
The settings for the LCD video monitor
connected to the S VIDEO MONITOR OUT jack
SYSTEM MEMORY
1 2
CLASSICAL LIVE/CLUB ENTERTAIN
5 6
SYSTEM MEMORY 2
The settings for the video projector connected
to the HDMI OUT jack
Saving each setting
Note
In the following example, the LCD video monitor and one input
component (for example, VCR) are connected to the S VIDEO
input jack and S VIDEO MONITOR OUT jack, and the video
projector and the other input component (for example, DVD
player) are connected to one of the HDMI IN jacks and HDMI
OUT jack.
1
Start playback of the desired video source on
the connected LCD video monitor and then
adjust "MANUAL DELAY" in "SOUND MENU"
appropriately (see page 84).
Press and hold M SYSTEM MEMORY 1 for
2
4 seconds.
This unit stores the audio and video synchronization
settings for the LCD video monitor to "MEMORY
1".
3
Change the input source to the component
connected to one of the HDMI IN jacks and
then start playback.
4
Adjust "MANUAL DELAY" in "SOUND MENU"
appropriately.
Press and hold M SYSTEM MEMORY 2 for
5
4 seconds.
This unit stores the audio and video synchronization
settings for the video projector to "MEMORY 2".
3 4
MOVIE
8
7