Memory Guard - Yamaha RX-V1800 Bedienungsanleitung

Customizing this unit (MANUAL SETUP)
Notes
• The "HDMI SCALING" parameter appears only when you set
"VIDEO CONV." to "ON".
• If you connect your video monitor via HDMI connection, this
unit automatically detects the available video signal resolution
of the video monitor, and an asterisk (*) appears on the left of
the available video signal resolution(s).
• If this unit cannot detect the available video signal resolution(s)
of the connected video monitor, set "MONITOR CHECK" (see
page 116) to "SKIP" and then set "HDMI SCALING" again.
• This unit does not convert between 480 line video signals and
576 line video signals.
HDMI aspect ratio HDMI ASPECT
Use this feature to select the adjustment of aspect ratio for
analog video signals output at the HDMI OUT jack.
Choice
THROUGH Does not make any adjustments to the aspect
ratio for the HDMI video signal sources.
Displays video images with the aspect ratio of
16:9
4:3 on your video monitor with the aspect ratio
of 16:9. Black stripes appear on the right and
left sides as a result.
SMART Fits video images with the aspect ratio of 4:3 to
your video monitor with the aspect ratio of 16:9.
Notes
• When "HDMI SCALING" is set to "THROUGH", you cannot
make any adjustments to "HDMI ASPECT".
• If the aspect ratio of the input video source is other than 4:3, this
unit automatically ignores the setting of "HDMI ASPECT".
• When "HDMI ASPECT" is set to "SMART", the video images
of the edge of the video monitor are rather stretched.
• When the video signals are input at HDMI IN jacks or the
signals are input with 720p, 1080i or 1080p of resolution, the
setting of "HDMI ASPECT" does not affect the video signals
output at the HDMI OUT jack.
90
En
Functions

Memory guard

Use this feature to prevent accidental changes to sound
field program parameter and other system settings.
C)MEMORY GUARD
>OFF
[p]/[[]:
[ENTER]:
Choice
OFF Turns off the "MEMORY GUARD" feature.
ON Protects:
– sound field program parameters
– "AUTO SETUP" items
– "SYSTEM MEMORY" ("SAVE")
– all speaker levels
– "MANUAL SETUP" items
Notes
• You can change the following parameters even if "MEMORY
GUARD" is set to "ON":
– "AUDIO SET" parameters (see page 84)
– "DECODER MODE" (see page 86)
– "MEMORY GUARD"
• When "MEMORY GUARD" is set to "ON", " " appears at the
top right of the "SET MENU" screen.
C)MEMORY GUARD
ON
Select
Return
Functions
G