Selecting Audio Input Jacks (Audio Select); Selecting The Multi Ch Input Component; Using Your Headphones - Yamaha RX-V1800 Bedienungsanleitung

Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend that you set the audio input jack select setting to
"AUTO" in most cases.
• You can adjust the default audio input jack select setting of this
unit by using "AUDIO SELECT" in "OPTION MENU" (see
page 91).
Rotate the C INPUT selector (or press one
1
of the input selector buttons (1)) to select
the desired input source.
Press D AUDIO SELECT (or 9 AUDIO SEL)
2
repeatedly to select the desired audio input
jack select setting.
Available input sources
V-AUX VCR DVR DTV/CBL DVD
A . S E L :
AUTO
Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI
Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT
Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
Note
This feature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. In addition,
HDMI is not available as an audio input jack select setting when
the HDMI input jacks are not used. Use "I/O ASSIGNMENT" in
"INPUT MENU" to reassign the respective input jack (see
page 86).
BD/HD DVD
A U T O
Currently selected audio input
jack select setting
Selecting the MULTI CH INPUT
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 30) as the input
source.
Rotate the C INPUT selector on the front panel
to select MULTI CH (or press 1 MULTI CH IN).
y
Use "MULTI CH" menu in "INPUT MENU" to set the
parameters for "MULTI CH" (see page 85).
Note
Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the input
source.

Using your headphones

Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
AUDIO TONE
SELECT CONTROL A/B/C/D/E PRESET/TUNING
INPUT
STRAIGHT
MAIN ZONE
MULTI ZONE
EFFECT
YPAO SILENT CINEMA S VIDEO
ON/OFF
PROGRAM OPTIMIZER
MIC PHONES
ON
OFF
MASTER
y
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 51).
Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• When the component connected to the MULTI CH INPUT
jacks of this unit is selected as the input source, only the signals
input at the MULTI CH INPUT FRONT jacks are output from
the connected headphones.
• All digital multi-channel audio signals are mixed down to the
left and right headphone channels.
Playback
PURE DIRECT
VOLUME
PRESET/ MEMORY TUNING
FM/AM MAN'L/AUTO FM MODE SLEEP
EDIT
ZONE ON/OFF ZONE CONTROLS
ZONE 2 ZONE 3
VIDEO L AUDIO R OPTICAL
VIDEO AUX
43
En