Initial Configuration - Yamaha RX-V1800 Bedienungsanleitung

Initial configuration

Use this feature to select the settings of the audio input
jack select, active decoders and extended surround when
you turn on this unit.
D)INIT. CONFIG
.
AUDIO SELECT;;AUTO
DECODER MODE;;AUTO
EXTD SUR.;;;;;AUTO
[p]/[[]:
[ENTER]:
Audio select AUDIO SELECT
Use this feature to designate the default audio input jack
select setting (see page 43) for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power
of this unit.
Choice
AUTO Automatically detects the type of audio input
signals and selects the appropriate audio input
jack select setting.
LAST Automatically selects the last audio input jack
select setting used for the connected input
source.
Decoder mode DECODER MODE
Use this feature to designate the default decoder mode
(see page 86) for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of
this unit.
Choice
AUTO Automatically detects the type of input signals
and select the appropriate decoder mode setting.
LAST Automatically selects the last decoder mode
setting used for the connected input source.
Extended surround EXTD SUR.
Use this feature to designate the extended decoder mode
(see page 84) for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of
this unit.
Choice
AUTO Automatically detects the digital audio input
signals and activates the appropriate decoder.
LAST Automatically selects the last decoder mode set
for "EXTD SUR." in "SOUND MENU".
D)INIT. CONFIG
Select
Return
Functions
Functions
Functions
Customizing this unit (MANUAL SETUP)
Zone set
E)ZONE SET
Use this feature to set the items related in Zone 2 or Zone
3.
E)ZONE SET
.
>ZONE2
AMP;;;;;;;;;;;;EXT
VOLUME;;;;;;;;;VAR
MAX VOL.;;;-30.0dB
INIT. VOL.;+16.5dB
[ ]/[ ]:
[p]/[[]:
Setting zone
Select the zone to set up "AMP", "VOLUME", "MAX
VOL." and "INIT. VOL.".
Choice
ZONE2 Sets the "ZONE SET" parameters for Zone 2.
ZONE3 Sets the "ZONE SET" parameters for Zone 3.
Zone 2/Zone 3 amplifier AMP
Use this feature to select how the Zone 2 or Zone 3
speakers are amplified. This parameter also effects the
speaker settings and the sound output of sound field
programs in the main zone.
Choices: EXT, [SP1], [SP2], BOTH
When the speakers in Zone 2 or Zone 3 are
connected to the external amplifier, and the
external amplifier is connected to the ZONE
OUT (ZONE 2 or ZONE 3) jacks of this unit:
Select "EXT". See "Using external amplifiers" on
page 108 for details.
Note
When "BI-AMP" is set to "ON" in "ADVANCED SETUP"
(see page 116), you can only set "AMP" to "EXT" in
"ZONE 2" or "ZONE 3".
When the speakers in Zone 2 or Zone 3 is
connected to the SP1 speaker terminals of this
unit directly:
Select "[SP1]". See "Using the internal amplifiers of
this unit" on page 109 for details.
Note
When you set "AMP" to "[SP1]" in "ZONE 2" or "ZONE
3" and the corresponding zone is turned on, no sound is
output from the surround back speakers.
ZONE3
UP/DOWN
Select
Functions
91
En