Option Menu - Yamaha RX-V1800 Bedienungsanleitung

Customizing this unit (MANUAL SETUP)

5 OPTION MENU

Use this menu to adjust the optional system parameters.
5 OPTION MENU
.
A)DISPLAY SET
B)VIDEO SET
C)MEMORY GUARD
D)INIT. CONFIG
E)ZONE SET
[ ]/[ ]:
[ENTER]:
Display settings
Note
Use "VIDEO" of "INITIALIZE" in "ADVANCED SETUP" to
set "OSD SHIFT" and "GRAY BACK" to the factory presets (see
page 116).
A)DISPLAY SET
.
DIMMER;;;;;;;;;;;;0
OSD SHIFT;;;;;;;;+5
GRAY BACK;;;;;;AUTO
SHORT MESSAGE;;;;ON
ON SCREEN;;;;ALWAYS
FL SCROLL;;;;;;CONT
[ ]/[ ]:
[p]/[[]:
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: –4 to 0
Control step: 1
3 l to make the front panel display dimmer.
• Press
h to make the front panel display brighter.
3
• Press
OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD.
Control range: –5 (downward) to +5 (upward)
Control step: 1
Initial setting: 0
3 l to lower the position of the OSD.
• Press
h to raise the position of the OSD.
3
• Press
88
En
UP/DOWN
Enter
A)DISPLAY SET
UP/DOWN
Adjust
Gray back GRAY BACK
Use this feature to display a gray background in your
video monitor when there is no video signal being input.
Choice
AUTO Displays a gray background on your video
monitor when there is no video signal being
input.
OFF Does not display a gray background on your
video monitor.
Notes
• Depending on the video signals being input or the system
setting of your video monitor (NTSC or PAL), the OSD may be
displayed abnormally. In such cases, set "GRAY BACK" to
"OFF".
• Even when "GRAY BACK" is set to "OFF", the OSD may not
be displayed correctly depending on the conditions of the
picture.
Short message display
SHORT MESSAGE
Use this feature to activate or deactivate the short message
display function.
Choice
ON Activates the short message display function.
The contents of the front panel display appear at
the bottom of the screen each time you operate
this unit.
OFF Deactivates the short message display function.
Note
The short message display does not appear in the following cases:
– when the component video signals with 480p/576p, 720p,
1080i or 1080p resolutions are input
– When HDMI video signals are input
On-screen display time ON SCREEN
Use this feature to set the time for which the iPod menu is
displayed in the OSD after you perform a certain
operation.
Choice
ALWAYS Displays the OSD unceasingly during an
operation.
10S Turns off the OSD 10 seconds after you perform
a certain operation.
30S Turns off the OSD 30 seconds after you perform
a certain operation.
Functions
Functions
Functions