Dynamic Range - Yamaha RX-V1800 Bedienungsanleitung

Low-frequency effect level
B)LFE LEVEL
Use this feature to adjust the output level of the LFE (low-
frequency effect) channel according to the capacity of
your subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective only when this unit
decodes bitstream signals.
Control range: –20 to 0 dB
Control step: 1 dB
B)LFE LEVEL
.
SPEAKER;;;;;;0dB
HEADPHONE;;;;0dB
[ ]/[ ]:
[p]/[[]:
Speakers SPEAKER
Adjusts the speaker LFE level.
Headphones HEADPHONE
Adjusts the headphone LFE level.
Note
Depending on the settings of "LFE/BASS OUT" (see page 77),
some signals may not be output at the SUBWOOFER PRE OUT
jack.
UP/DOWN
Adjust
Customizing this unit (MANUAL SETUP)

Dynamic range

Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when this unit is
decoding bitstream signals.
C)DYNAMIC RANGE
SPEAKER;;;;;;;;;MAX
.
HEADPHONE;;;;;;;MAX
[ ]/[ ]:
[p]/[[]:
Speakers SPEAKER
Adjusts the dynamic range compression for the speakers.
Headphones HEADPHONE
Adjusts the dynamic range compression for the
headphones.
Choice
MIN/AUTO • MIN: Adjusts the dynamic range to narrow
when this unit is decoding bitstream signals
(except Dolby TrueHD).
• AUTO: Adjusts the dynamic range according
to the instruction of the input source signals
when this unit is decoding Dolby TrueHD
signals.
STD Adjusts the dynamic range to medium. When
this unit is decoding Dolby TrueHD signals, the
dynamic range control is always active
regardless of the instruction of the input source
signals.
MAX Preserves the greatest amount of dynamic range.
C)DYNAMIC RANGE
UP/DOWN
Select
Functions
83
En