Volume; Mute; Tv Mode And Radio Mode; Info - SMART Smartmeter C10 Bedienungsanleitung

Using the Meter
tion for about four seconds. Apart from the displayed channel values, the
station details include audio, video and PCR PID
5.7.2

Volume

¾ Press
/ to adjust the volume.

5.7.3 Mute

¾ Press the F1 key (mute) to switch off the TV tone. Press the F1 key again,
to switch the TV tone back on.
5.7.4

TV mode and radio mode

¾ Press the F2 key (TV/radio) to switch between TV mode and radio mode.
5.7.5

Info

¾ Press the F3 key (info) to display details on the selected station (see
above). Press the F3 key again to return to the TV picture.
5.7.6

External Video Device

¾ Press the AV IN key to use an external video device (e.g. PC TV card, video
recorder) as a source of the video signal. The external device must be con-
nected to the meter via the Video In and Audio In ports on the top of the
meter. Press the AV IN key again to return to aerial mode.
5.7.7

Full Screen Mode

¾ Press the EXIT key to hide the functional keypad.
¾ Press the EXIT key once again to display the functional keypad.
5.8 Recording (PVR
)
¾ Before using the recording function, you must connect a
5.8.1

Recording a Video

1. Press the EXIT key until you are in TV mode.
2
PID = Packet Identifier: Tells the user which data packets are to be used.
3
PVR = Personal Video Recorder
76
3
)
data storage device.
2
(packet identifier).
smartmeter C10