Settings; Osd Transparency; Signal Audio Tone - SMART Smartmeter C10 Bedienungsanleitung

Using the Meter

5.5 Settings

Use the SETTINGS menu to adjust the basic settings.
1. Press the MENU key.
2. Use the / and
select the SETTINGS menu item
and confirm your selection by
pressing OK. The following win-
dow will open:
)
¾ Press the SYSTEM key to go directly from TV mode to the
¾ Use the
/ keys to select the menu item that you wish to change:

5.5.1 OSD Transparency

¾ Press
/ to adjust the transparency of the menu display between values
of 1 (no transparency) and 10 (almost transparent).
5.5.2

Signal Audio Tone

¾ Press
/ to select/unselect an audible signal indicating that a station is
found during station search.
68
/ keys to
SETTINGS sub-menu without using the menu.
smartmeter C10