Initial Setup; Charging The Battery - SMART Smartmeter C10 Bedienungsanleitung

4

Initial Setup

4.1 Charging the Battery

¾ Charge the battery completely before you use the meter for
)
x whether the meter is switched on or off or
x whether the battery-switch on the underside of the meter is
Charge the battery as follows:
1. If the meter is switched on, switch it off.
2. Connect the low-voltage plug of the power plug to the low-voltage socket on
the bottom of the meter.
The battery starts charging as soon as you connect the smartmeter C10 to the
power plug.
If the meter is switched off, the power LED will light up green. If the meter is
switched on the power LED will light up red and the charging process will be
shown with a continuous battery symbol:
Completed charging is indicated by a steady battery symbol filled with four
bars:
An integrated automatic charging system ensures optimum charging of the bat-
tery. Please keep the meter switched off during charging.
¾ When you charge the battery for the first time, charge it for
)
x The maximum charging time is 12 hours.
After charging is completed, disconnect the meter from the power plug.
smartmeter C10
the first time.
The battery can be charged regardless of
set to On or Off.
at least 5 hours.
Initial Setup
57