General Safety Notes; Intended Use; Hazards From Improper Use - SMART Smartmeter C10 Bedienungsanleitung

General Safety Notes

3 General Safety Notes

3.1 Intended Use

The meter is intended for measuring signals in DVB-C systems. It is intended
for this purpose only and must not be used for other purposes. Please use the
accessories only for the purposes described in this user manual.
Any use other than the intended use is improper and can result in material
damage or even bodily injury.
We assume no liability for any damages or injuries resulting from improper use
of the device.

3.2 Hazards from Improper Use

¾ Make sure the meter and especially the power plug are al-
¾ Do not expose the meter to temperatures below 0 °C.
¾ Connect the power plug only to 100-240 V AC, 50/60 Hz.
¾ Charge the meter only with the supplied power plug.
¾ During electrical storms, disconnect the meter from the TV
¾ Do not put heavy objects onto the meter.
CAUTION
¾ Avoid mechanical influences that can damage e.g. the LCD
¾ Do not bend or crimp the cables.
¾ Do not open the supplied power plug.
WARNING
¾ Have the power plug repaired by qualified personnel only.
54
ways kept dry.
cable and from the power supply.
display or the housing of the meter.
Do not start to use the meter if you can see signs of dam-
age or if you can hear loose parts inside the device.
Danger of electrical shock from high voltage
Damages on the housing of the power plug or an improper-
ly repaired power plug can expose the user to mains volt-
age.
smartmeter C10