Using The Meter; Tp Search - Checking Television Reception; Searching Channels Automatically - SMART Smartmeter C10 Bedienungsanleitung

5

Using the Meter

The smartmeter C10 is operated using the OSD. Individual functions can also
be carried out directly using the keys on the surface of the device.

5.1 TP Search - Checking Television Reception

The TP search sub-menu primarily serves as checking the television reception
in a DVB-C-system.
After first switching on the device or resetting to the default settings, the chan-
nel list is empty and no channels are preset. You will be directed to the main
menu.
¾ Press EXIT (several times if neces-
sary) to get to the TV mode. You
will receive the following message:
You will then be able to access different channels using the channel list.
The channel list is completed as follows:
1. Press MENU to go to the main
menu.
2. Select FREQ SEARCH and con-
firm by pressing OK. The following
window will open:
5.1.1

Searching Channels Automatically

There are several possibilities for searching receivable channels:
5.1.1.1 "Blind Scan"
1. Press the keys
2. Use the keys
At intervals of 1 MHz, the entire reception area within 50-858 MHz will now
smartmeter C10
and in order to select the menu item search.
and to change to the Blind Scan and press OK.
Using the Meter
61