SMART Smartmeter C10 Bedienungsanleitung Seite 62

Using the Meter
be searched. All receivable channels will be listed in the channel list. There
will be no distinction made between encoded or FTA
3. After the search process has ended, the number of TV and radio channels
found will be shown. Confirm by pressing OK to return to the menu.
5.1.1.2 "All TP"
1. Press the keys
2. Use the keys
A message will appear asking whether or not you only want to search FTA
channels.
¾ Using the keys
If you select NO, both encoded and FTA channels will be found. If you
select YES only FTA channels will be found.
The frequency table saved in the device (PAL-B/G-screen) will now search for
receivable channels. The channels found will be listed in the channel list.
3. After the search has ended, the number of TV and radio channels found will
be shown. Confirm by pressing OK to return to the main menu.
5.1.1.3 "Network Search"
1. Press the keys
2. Press the keys
press OK, select the desired frequency from the list and confirm by pressing
OK. The symbol rate and QAM mode will then also be set Æ see point 7.
3. Press the keys
4. Press the keys
5. Press the keys
6. Press the keys
7. Press the keys
8. Use the keys
A certain transponder is assigned to the data entered (frequency, symbol
rate, QAM mode). All transponders with the same ID will now search for re-
ceivable channels. The channels found will be listed in the channel list.
1
FTA = Free To Air (engl.), ohne Verschlüsselung ausgestrahltes Programm
62
and to select the search menu item.
and to change to the All TP menu item and press OK.
and select YES or NO.
and to select the Frequency menu item.
and to select the desired frequency. Alternatively,
and to select symbol rate menu item.
and to select the desired symbol rate.
and to select the QAM mode menu item.
and to select the desired QAM mode.
and to select the Search menu item.
and to change to Network search and press OK.
1
-channels.
smartmeter C10