Help; Software-Update - SMART Smartmeter C10 Bedienungsanleitung

Using the Meter
3. Press / to select YES. Press OK to confirm your selection.

5.6.10 Help

Enter the USB Menu (see above).
Press the F3 key to enter the Help
submenu. The display shows a help
message containing notes on USB
Menu functions:

5.6.11 Software-Update

You can download an updated software version (compressed ZIP archive) from
the support section on our website at www.smart-electronic.de.
¾ Make sure that the smartmeter C10 is supplied with power
¾ If you are not sure whether the battery charge will last
CAUTION!
Carrying out an update:
1. Unzip the zip file.
2. Save the file on your data storage device with the ending *.bin.
3. Insert the data storage device to your smartmeter C10.
4. Press the MENU key to go to the main menu.
5. Select the USB sub-menu and confirm by pressing OK to open the PC UP-
DATE window.
6. In the PC UPDATE window press the F2 key (USB Menu) to open the USB
MENU window.
7. Use the keys
74
while you update the meter software.
through the update, connect the smartmeter C10 to the
power supply via the power plug before you start the up-
date.
and to select the file type software.
smartmeter C10