Next Level Racing MICROSOFT EDITION Bedienungsanleitung Seite 29

EXTENDED HOTAS INSTALLATION
NOTE: To achieve the lowest Flight Stick position, install the extended
HOTAS Bracket in the lower cross-member position as shown in Step 07.
41
Align the mounting holes on the Extended HOTAS Bracket with the mounting holes on the cross
member. Bolt through and secure with 2 x M8 Bolts, Washers and Flange Nuts.
42
Align the mounting holes on the HOTAS Plate with the mounting holes on the Extended HOTAS Bracket. Bolt
through and secure with 2 x M8 Bolts, Washers and Flange Nuts.
HOTAS BRACKET ANGLE ADJUSTMENT
43
Uninstall the front M8 Bolt, Washer and Flange Nut securing the HOTAS PLATE to the HOTAS Bracket. Adjust the
HOTAS Plate to the desired angle and re-install hardware to secure.
Video Instruction: bit.ly/nlrbuild
29 29
PARTS:
• • 1 x Extended HOTAS Bracket
• • 2 x 55mm Sockethead Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
PARTS:
• • 1 x HOTAS Plate
• • 2 x 55mm Sockethead Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
PARTS:
• • NIL