Next Level Racing MICROSOFT EDITION Bedienungsanleitung Seite 28

support@nextlevelracing.com
CENTRE PLATE ANGLE ADJUSTMENT
38
Uninstall the front Bolts, Washers and Flange Nuts securing the Centre Plate to the Inner Centre Pole. Angle to
the desired position. Bolt through and secure with 1 x Bolt, Washer and Flange Nut previously uninstalled.
TPR RUDDER INSTALLATION
39
Install 4 x M6 Threaded Studs into the TPR Adaptor.
40
A) Align the mounting holes on the front of the TPR Rudder with the Threaded Studs on the TPR Adaptor.
B) Secure with 2 x M6 Flange Nuts. The TPR Rudders are ready to install onto the cockpit.
28 28
PARTS:
• • NIL
PARTS:
• • 1 x TPR Adaptor
• • 4 x M6 20mm Threaded Studs
PARTS:
• • 2x M6 Flange Nuts
• • TPR Rudder (not included)