Timer Enable - Profitec Ride Bedienungsanleitung

10.4.4 Timer Enable

To be able to use the programmed switch-on and switch-off times, the timer
function must be activated ("ON"). If the timer function is not activated ("OFF"),
the machine ignores the programmed switch-on and switch-off times. In
this case, the machine uses the time set for ECO mode for automatically
switching off the heating function. When the timer function is deactivated,
the programmed switch-on and switch-off times are preserved and can be
reactivated at any time. The timer function is activated and deactivated as
follows:
EN - 133
The display with the switch-on and
¾
switch-off times appears.
4. Press the right-hand button .
The hour display for the first switch-on
¾
time flashes.
5. Set the hours using the left-hand button
and confirm using the right-hand button
.
The minute display for the first switch-on
¾
time flashes.
6. Set the minutes using the left-hand
button and confirm using the right-hand
button .
The hour display for the first switch-off
¾
time flashes.
7. Set the hours using the left-hand button
and confirm using the right-hand button
.
The minute display for the first switch-off
¾
time flashes.
8. Set the minutes using the left-hand
button and confirm using the right-hand
button .
9. The second switch-on and switch-off
times are set in the same way.
1. Open the main menu.
RIDE_BA_V1.0