Transportation - Profitec Ride Bedienungsanleitung

6.5

Transportation

NOTICE
Damage due to improper transportation
The machine may become damaged if not transported properly.
• Only use the original packaging for transportation.
• Make sure that the machine is upright, if possible on a pallet, during
transportation.
• Do not place any other heavy objects on the packaging.
• Stack a maximum of 3 packages on top of one another.
• Protect the machine from the elements (e.g. snow, rain, frost, direct
sunlight).
Carry out the following steps to transport the machine. Due to the weight of
the machine, it is recommended that two people transport the machine:
1. Switch off the machine (see Chapter 9.2.1, „Switching the machine on
and off") and disconnect the mains plug from the mains.
2. Drain all water out of the machine (see Chapter 11.6, „Emptying the
boiler").
3. Allow the machine to cool down.
4. Empty the water tank.
5. Clean the machine and accessories (see Chapter 11, „Cleaning") and
allow them to dry.
6. Insert the accessories in the corresponding cut-outs in the original
foam insert.
7. Pack the machine with the original protective cover.
8. Lift the machine from underneath using both hands and pack it in the
original box.
9. Transport the machine to the desired location.
EN - 102 RIDE_BA_V1.0