Profitec RIDE Bedienungsanleitung Seite 105

7.3 Installing the accessories

CAUTION
Risk of injury due to sharp edges
The edges of the drip tray and grid are sharp and may cause injuries.
• Always be careful when touching the edges.
• Avoid pressing too hard on them.
Fig. 3 Drip tray and grid
1 Drip tray
7.3.1 Installing the blind filter
1. Insert the blind filter.
2. Insert the grid (2, Fig. 3) in the drip tray (1, Fig. 3).
3. Place the drip tray with the recesses on the underside onto the holder
on the machine and push it in until it latches in place.
EN - 104
2 Grid
Tip
The blind filter can be stored underneath the drip
tray. There is a corresponding recess for it in the
drip tray holder.
2
1
RIDE_BA_V1.0