Eco Mode - Profitec Ride Bedienungsanleitung

10.3.5 Eco Mode

The following eco mode settings are set by default:
• "ON": Function switched on
• "90": Countdown of 90 minutes until activation of ECO mode
The function can be switched on ("ON") or off ("OFF"). The countdown can be
set to a maximum of 600 minutes in steps of 30 minutes. Proceed as follows:
EN - 128
3. Select the setting "ON" (pre-infusion
activated) or "OFF" (pre-infusion
deactivated).
4. Wait for 3 seconds.
The setting is applied and the active pre-
¾
infusion value (top value) flashes.
5. Set the desired duration (seconds) for the
active pre-infusion.
6. Wait for 3 seconds.
The setting is applied and the passive
¾
pre-infusion value (bottom value) flashes.
7. Set the desired duration (seconds) for the
active pre-infusion.
1. Open the main menu.
2. Select and open the "Eco Mode" submenu.
3. Select the desired setting.
RIDE_BA_V1.0