Rinsing The Machine; After Initial Start-Up - Profitec Ride Bedienungsanleitung

8.3

Rinsing the machine

Rinse the machine with 2 - 3 water tank refills before preparing your first
espresso:
1. Switch off the heated-up machine using the on/off button.
The LED ring goes out.
¾
2. Drain water out of the machine via the hot water wand (see Chapter 11.6,
„Emptying the boiler").
3. Refill the water tank (see Chapter 9.4, „Filling the water tank with water")
4. Switch on the machine using the on/off button.
The LED ring lights up.
¾
5. Wait until the brew temperature is shown on the display.
6. Repeat this procedure three times.
7. With the machine switched on, empty the remaining quantity of water
via the brew group.
8.4

After initial start-up

It is recommended that you place espresso cups on the cup tray after initial
start-up. This will keep the cups warm for later use.
EN - 108 RIDE_BA_V1.0