Navigation In The Menu; Opening The Main Menu; Selecting And Opening Submenus; Changing Settings - Profitec Ride Bedienungsanleitung

10.2 Navigation in the menu

It is possible to navigate and change settings using the two navigation
buttons.

10.2.1 Opening the main menu

1. Press and hold the left-hand
3 seconds.
The main menu opens and the "Brew Temperature" icon appears on the
9
display.

10.2.2 Selecting and opening submenus

1. In the main menu, repeatedly press the left-hand
until the desired submenu is displayed.
2. Press the right-hand
The selected submenu opens and the corresponding submenu settings
9
are shown on the display.

10.2.3 Changing settings

1. In the submenu, repeatedly press the left-hand
navigation button until the desired setting is displayed.
2. Wait for 5 seconds.
The selected setting is automatically applied and the display returns to
9
the higher menu level. If no input has been made after several seconds,
the menu automatically closes and the current brew temperature and, if
activated, the steam temperature are shown on the display.

10.3 Basic menu settings

To open menus and change settings, follow the instructions in the Chapter
10.2, „Navigation in the menu".
EN - 125
Water tank icon
Water needs to be topped up (see Chapter 9.4, „Fill-
ing the water tank with water"), or
Water tank not correctly installed (see Chapter 11.5.1,
„Orientation of the water tank")
Refill icon (see Chapter 9.4, „Filling the water tank
with water")
right-hand
navigation button.
navigation button for
navigation button
or right-hand
RIDE_BA_V1.0