Filling The Water Tank With Water; Pouring Ground Coffee Into The Portafilter And Pressing (Tamping) - Profitec Ride Bedienungsanleitung

9.4

Filling the water tank with water

NOTICE
Damage due to overflowing water
The water tank can overflow and leaking water can get into the machine.
• Fill the water tank to just below the edge.
• Do not spill any water over the machine when filling the tank.
To fill the water tank, it can be taken out of the machine or filled directly using
a container. Only operate the machine with fresh, soft drinking water (up to 4°
dH = German degree of hardness) Do not use carbonated water.
The following messages indicate that the water needs to be topped up:
Proceed as follows to refill the tank:
1. Remove the cup tray from the top of the machine.
2. Fill the water tank with water.
3. Put the cup tray back.
9.5 Pouring ground coffee into the portafilter and pressing
(tamping)
When preparing an espresso, it is recommended to prepare the ground coffee
as well as possible. The tamper included in the scope of delivery can be
used to press and compact the ground coffee in the portafilter. Compacting
the ground coffee ensures that the water does not take the path of least
resistance through the ground coffee (so-called channeling) and the espresso
is extracted evenly.
1. Fill the portafilter with ground coffee. Use the markings in the filter to
identify the optimal amount of ground coffee.
EN - 112
Tank is almost empty
The current drawing process is continued.
Top up with water soon.
Tank is empty
The pumping process is ended and no more water
can be drawn.
Top up with water.
RIDE_BA_V1.0