Fitting Adjustable Glides To Both Sides Of The Cantilever - Rehau RAUWORKS PARTITION Montage- Und Bedienungsanleitung

K
Illustration 9: Assembly of the cantilever
Illustration 10: Fully assembled cantilever
34
4 1 3
a. Join the clamping plate with the bracket as described on page 8.
b. Screw the brackets onto the bottom frame profile as described on
page 9.
c. Screw the two adjustable glides (K) into the cantilever (J) all the
J
way up to the stop (see illustration 9).
d. Repeat step c in order to fit the second cantilever with adjustable
glides.
Ensure that the adjustable glide is in the correct position. Failure to
observe this may pose the risk that the stability of the screen is
impaired.

Fitting adjustable glides to both sides of the cantilever