Fitting Castors To Both Sides Of The Cantilever - Rehau RAUWORKS PARTITION Montage- Und Bedienungsanleitung

E
F
Illustration 5: Fitting the castors (E) to the cantilever (B)
Illustration 6: Fully assembled cantilever
32
4 1 2
Fitting castors to the cantilever
a. Screw the thread plugs (F) into the cantilever (B). Tighten the
b. Push the castors (E) onto the thread plugs (F) (see illustration 5).
B
c. Repeat steps a to b for the second cantilever.

Fitting castors to both sides of the cantilever

thread plugs firmly with a 12 mm open-end wrench (see illustra-
tion 5).
The cantilever with castors is now fully assembled (see illustration 6).