Salicru SPS ADVANCE R2 Betriebsanleitung Seite 37

4. PRESENTATION.
4.1. VIEWS.
4.1.1. Views of the device.
Fig. 1 and Fig. 2 correspond to
4 and Fig. 5 to SPS ADVANCE T
product is constantly evolving, discrepancies or slight contradic-
tions may arise. If in any doubt, the labelling on the equipment itself
will always prevail.
The nameplate of the device shows all of the values re-
lating to its main properties and characteristics. Act ac-
cordingly for its installation.
4.1.1.1. Views of the SPS ADVANCE R2 device.
Fig. 1. Front view of the SPS ADVANCE R2.
AC IEC 14 Input IEC C13 Outputs
Fig. 2. Rear view of the SPS ADVANCE 750 R2..
AC IEC 14 Input
Fig. 3. Rear view of the SPS ADVANCE 1000/1500 R2.
USER MANUAL
SPS ADVANCE R2 devices and Fig.
devices. However, because the
Control panel
with LCD display
IEC C13 (progra-
mable) outputs
IEC C13 Outputs
IEC C13 (progra-
mable) outputs
Protective cover
Intelligent slot
Protection cap
Intelligent slot
SPS ADVANCE R2 & T UNINTERRUPTIBLE POWER SUPPLY (UPS)
USB
Port
COM Port EPO
RS232
USB
Port
COM Port EPO
RS232
37