Salicru SPS ADVANCE R2 Betriebsanleitung Seite 36

3. QUALITY ASSURANCE AND
STANDARDS.
3.1. STATEMENT BY THE MANAGEMENT.
Our goal is customer satisfaction, therefore this Management has
decided to establish a Quality and Environment Policy, through
the implementation of a Quality and Environmental Manage-
ment System that will enable us to comply with the requirements
ISO 9001
demanded in the
tomers and Stakeholders.
Likewise, the management of the company is committed to the
development and improvement of the Quality and Environmental
Management System, through:
Communication to the entire company of the importance of
•
satisfying both the client's requirements as well as legal and
regulatory requirements.
The dissemination of the Quality and Environment Policy and
•
the setting of the Quality and Environment objectives.
Conducting reviews by the Management.
•
Providing the necessary resources.
•
3.2. STANDARDS.
The SPS ADVANCE R2
manufactured and sold in accordance with Quality Management
EN ISO 9001. The
Standard
with EC Directives through the application of the following stand-
ards:
2014/35/EU. - Low voltage safety.
•
2014/30/EU. - Electromagnetic Compatibility - EMC-.
•
2011/65/EU. - Restriction of the use of hazardous substances in
•
electrical and electronic equipment (RoHS).
According to the specifications of the harmonized standards. Ref-
erence standards:
EN-IEC 62040-1. Uninterruptible Power Supplies -UPS-. Part
•
1-1: General and safety requirements for UPS used in user ac-
cess areas.
EN-IEC 62040-2. Uninterruptible Power Supplies -UPS-. Part
•
2: EMC requirements.
The manufacturer is not liable in case of modification or
intervention on the equipment by the user.
WARNING!:
SPS.ADVANCE R2
0.85..3 kVA. These are category C2 UPSs. In residential
environments, this product may cause radio interference,
in which case the user must take additional measures.
36
ISO 14001
and and also by our Cus-
and SPS ADVANCE T are designed,
marking indicates conformity
0.75..1.5 kVA and SPS.ADVANCE T
These devices should not be used with basic life support
(BLS) applications, where a power failure can render the
life support equipment out of service or significantly affect
its safety or effectiveness. It is also not recommended in
medical applications, commercial transport, nuclear instal-
lations, or other applications or loads, where a failure of
the product can lead to personal or material damages.
The EC declaration of conformity of the product is available
to the customer upon express request to our headquarters.
3.3. UKCA PRODUCT MARK AND UK
AUTHORIZED REPRESENTATIVE.
UK CA product marking indicates that this UPS has been evaluated
by Salicru and is deemed to comply with safety, health and
environmental protection requirements.
The UK CA Declaration of Conformity is available upon request. For
copies of of the UKCA Declaration of Conformity, please contact
Salicru or check our website: www.salicru.com
UK Authorised Representative
Indele Limited
7 Bell Yard,
WC2A 2JR,
London
3.4. ENVIRONMENT.
This product has been designed respecting the Environment and
manufactured in our certified facilities according to the
standard.
Recycling of the equipment at the end of its useful life:
Our company undertakes to use the services of authorized and
regulatory companies to treat the set of products recovered at the
end of their useful life (contact your distributor).
Packaging:
For the recycling of the packaging there must be compliance with
the legal requirements in force, according to the specific regula-
tions of the country where the equipment is installed.
Batteries:
Batteries pose a serious danger to health and the environment. The
disposal of them shall be carried out in accordance with the laws
in force.
ISO 14001
SALICRU