Opera Fusion IFU038A0 Installations- Und Benutzerhandbuch Seite 61

5.23 RESIDUAL HEAT INDICATOR
The cooktop is equipped with a residual heat indicator "H," which signals the presence of
residual heat on the glass-ceramic surface. Although this surface is not heated directly, it
can retain heat coming from the pot used. As long as the "H" indicator is on after the zone is
turned off, you can take advantage of the residual heat for operations such as reheating or
melting food.
Even when the "H" symbol disappears, the zone may still be hot. Therefore,
caution is necessary to avoid burns.
5.24 ENERGY MANAGEMENT
For technical reasons, some cooking zones on
the cooktop are grouped into modules to limit
maximum energy consumption and prevent
overloads. These modules include the front left
and rear left cooking zones or the front right
and rear right cooking zones.
Each module has a maximum power level
shared between the two cooking zones
that are part of it. If both zones of the same
module are active, the zone whose power
was increased last will receive the requested
power, while the other will see its heating
power reduced. The power reduction will be
visible by the flashing of the display of the
affected cooking zone. This management
prevents overload by efficiently distributing
energy between the cooking zones.
INDUCTION HOB | 61