Opera Fusion IFU038A0 Installations- Und Benutzerhandbuch Seite 65

NOTE! The following situations may occur:
Situation 1:
Extraction level set, extraction timer set, all cooking zones off. The cooktop remains on; the
•
extraction level remains active for the timer duration. Then, the cooktop turns off completely.
Situation 2:
Extraction level set, timer set; cooktop turned off via the ON/OFF button. Level 1 of post-
operation is set and remains active for the time set by the timer. Then, the cooktop turns off
completely. The timer can be set as soon as the extraction is running and begins to function
as soon as all cooking zones are turned off.
5.34 FILTER STATUS INDICATOR
The touch control of the cooktop is equipped with a filter timer that reminds the importance
of regularly cleaning the grease filter and the charcoal filter of the hood. The filter rinse time
is counted each time the extraction is on, including during post-operation periods. When the
set time expires, the letter "F" (for the grease filter) or "C" (for the charcoal filter) flashes on
the extraction power setting display. During post-operation, the "F" or "C" indications are not
visible, but they reappear when the cooktop is turned on.
The filter display can be confirmed or reset as follows:
• A brief press on the extraction power setting display confirms the display. This
confirmation will appear only after the cooktop has been turned off and back on.
• A long press for 3 seconds resets the timer. In this case, a confirmation tone will be
emitted, and the symbols "F" or "C" will be displayed statically for 2 seconds before
returning to the standard display.
5.35 HOOD LIGHT CONTROL
To use this feature, the cooktop must be connected to a compatible Opera hood.
To pair the two devices, follow the instructions in the Bluetooth pairing section. If you want to
disable this function, follow the instructions in the "Bluetooth Disabling" section.
• Prerequisite: The cooktop must be on.
To turn on the hood lights:
1. Press the Hood Light button.
2. The button will illuminate brightly. The lights are now on.
To turn off the hood lights:
1. Press the Hood Light button.
2. The button will illuminate with a soft light. The lights are now off.
To dim the hood lights:
1. Press and hold the Hood Light button for 2 seconds.
2. Select the desired brightness on the slider device.
INDUCTION HOB | 65