Deactivating the Key Lock:
3.
Press the lock button again. Unlocking is
confirmed by a beep.
5.17 BRIDGE FUNCTION
The front and rear cooking zones can be activated together for a cooking process (Bridge
function), allowing the use of larger pots.
1.
Turn on the cooktop and place a pot over
the zones to be joined.
2.
Press both the front and rear cooking
zone selection buttons simultaneously
to activate the Bridge function. Once
activated, the power level setting of the
rear zone will display the bridge symbol.
3.
To deactivate, press both the front and
rear cooking zones again simultaneously
or turn off the cooktop. The cooking
zones will revert to being two separate
zones.
WARNING
The pot or pan must cover at least half of the cooking zones used to be
recognized by the pot recognition device!
5.18 COOKING TIMER
The timers for the cooking zones can be used to automatically turn off a cooking zone when
the set time expires, which can be adjusted within a range of 1 minute to 1 hour and 59
minutes. During the operating time, the cooking zone can be used normally, and the cooking
level can be changed. Each cooking zone is equipped with an independent timer, meaning
you can set the time for each individual cooking zone.
1.
Prerequisite: Ensure that the pot is
positioned on the corresponding
cooking zone and that a cooking level
has been set.
2.
Press the timer display.
3.
Use the Plus and Minus buttons to set
the desired time. The timer symbol for
the cooking zone will light up.
Left position: hours
Middle position: every 10 minutes
Right position: every minute
After a few seconds, the timer will start counting down. When it reaches 0, it emits a beep, the
display shows "000," and the cooking zone turns off. Press any button to deactivate the beep.
58 | FUSION
3.
1.
2.
1.
2.
3.