Opera Fusion IFU038A0 Installations- Und Benutzerhandbuch Seite 68

6.0 TROUBLESHOOTING
Interventions and repairs on the device by unqualified individuals are dangerous as they can
cause electric shocks or short circuits. Do not attempt to intervene on or repair the appliance;
this could result in injury to persons and damage to the appliance. Therefore, have any work
carried out only by a qualified electrician, such as a customer service technician.
In case of a malfunction, first consult these instructions to see if the problem can be
resolved independently.
PROBLEM
Are fuses regularly blowing?
Is the cooktop cracked or
damaged?
The cooktop does not turn on?
The cooktop or cooking zone
suddenly turned off?
Is the pot missing symbol
displayed?
Il display a led per le
impostazioni di cottura e
l'indicazione di calore residuo H
non si accende o si accende solo
parzialmente
Il simbolo o il codice ER03
comincia a lampeggiare e
viene emesso un breve segnale
acustico
The error code E2 is displayed?
No display, no function?
68 | FUSION
SOLUTION
Contact customer service or an electrician!
If the ceramic glass cooktop has fractures, cracks, tears, or any other
damage, there is a risk of electric shock. Immediately turn off the
appliance. Disconnect the fuse and call customer service.
• Has a fuse in the house's wiring (fuse box) blown?
• Is the cooktop connected to the power supply?
• Is the child safety lock activated, meaning the display shows
an "L"?
• Are the sensor buttons partially covered by a damp cloth,
liquid, or metallic object?
• Resolve the issue. Have unsuitable cookware been used?
Consult the section on suitable cookware for induction
cooktops.
Was the ON/OFF button accidentally pressed?
• Are the sensor buttons partially covered by a damp cloth,
liquid, or metallic object? A brief beep will sound.
• After a few seconds, the appliance will turn off. Remove the
object from the sensor buttons.
• Has the safety shut-off device been activated, meaning a
constant power level has been used for an extended period?
Consult the section regarding time limitation on operation.
The pot is not suitable for induction cooking or has a base that is
too small.
The display is faulty. Call customer service. Risk of burns, as the
temperature warning is not guaranteed.
This indicates a touch control sensor activation due to food falling
on the cooktop, pots, or other objects. Solution: clean the surface or
remove the object. To deactivate the symbol, press the same button
again or turn the cooktop off and back on.
The electronic unit is too hot. Check the installation of the cooktop
and ensure sufficient ventilation. Consult the section "Overheating
Protection." Do not heat empty pots and use appropriate cookware.
The cooktop has been connected incorrectly. Connect the appliance
to the correct electrical supply.