Profitec PRO 400 Bedienungsanleitung Seite 45

3. Set the brew group lever
up.
4. Set the switch to the
middle position (position
II).
5. Switch on the machine.
6. PRO 400:
The green LED flashes.
JUMP:
The display shows "Pi".
7. Pull the brew group lever
down.
JUMP:
The display shows "ECo".
Now you have 5 seconds
to change the setting.
After this time, the
machine automatically
switches back to normal
operation.
8. Set the switch to the front
position (position I) and
then back to the middle
position (position II).
Translation of the original German user manual
PRO 400:
PRO 400:
ENGLISH
JUMP:
JUMP:
JUMP:
44