Profitec PRO 400 Bedienungsanleitung Seite 42

6. PRO 400:
The green LED flashes.
JUMP:
The display shows "Pi".
7. Set the switch to the rear
position (position III) and
then back to the middle
position (position II).
8. PRO 400:
The setting is confirmed
and saved when the green
LED lights up (remains on
for 3 seconds).
JUMP:
The display shows "Pi" and
"oFF".
9. Pull the brew group lever
down again and wait 5
seconds.
PRO 400:
The machine returns to
normal operation.
JUMP:
The machine shows "ECo"
for 5 seconds. To activate
and deactivate Eco mode
(see chapter 6.5).
Important
Ensure that the brew group lever remains in the upper position during adjustment.
6.5 The ECO mode
For reasons of sustainability, the machine is delivered with ECO mode activated. This value is set to 90
min by default. ECO mode switches off the heating of the boiler after 90 minutes of inactivity.
PRO 400: The green LED flashes and indicates that the machine is in ECO mode.
JUMP: A dot moves across the display indicates that the machine is in ECO mode.
To reactivate the machine from ECO mode, the brew group lever or switch can be operated. If the brew
group lever is operated, it must be closed again so that no draw starts afterwards.
Translation of the original German user manual
PRO 400:
PRO 400
ENGLISH
JUMP:
JUMP
JUMP:
41