Profitec PRO 400 Bedienungsanleitung Seite 48

6.7 JUMP: Setting for °C und °F
1. Switch the machine off.
2. Make sure the water tank
is filled to at least half
3. Set the switch under the
machine to the front
position (I) to set °C and to
the rear position (III) to set
°F.
4. Set the brew group lever
up.
5. Switch on the machine.
6. The selected setting is
confirmed on the display
with °C or °F.
7. Pull the brew lever down
again and wait for five
seconds. The machine
switches back to normal
operation. Your setting
has been saved.
Translation of the original German user manual
°C
ENGLISH
°F
47