Machine Reset - Profitec Pro 400 Bedienungsanleitung

9. PRO 400:
The setting is confirmed
and saved by the green
LED lighting up (3
seconds).
JUMP:
The display shows the
message "ECo" and "on".
10. After a short pause of a
few seconds, the machine
returns to normal
operation.

6.6 Machine reset

You can reset the Pro 400 / JUMP to the factory settings.
Factory settings:
•
ECO mode ON (90min)
•
Preinfusion OFF
To reset the Pro 400 / JUMP to factory settings, proceed as follows:
1. Switch the machine off.
2. Ensure that the water tank
is at least half full.
3. Set the brew group lever
up.
4. Set the switch to the
middle position (position
II).
Translation of the original German user manual
PRO 400:
PRO 400:
ENGLISH
JUMP:
JUMP:
45