Profitec PRO 400 Bedienungsanleitung Seite 44

7. Pull the brew group lever
down.
JUMP:
The display shows "ECo".
Now you have 5 seconds
to change the setting.
After this time, the
machine automatically
switches back to normal
operation.
8. Set the switch to the rear
position (position III) and
then back to the middle
position (position II).
9. PRO 400:
The setting is confirmed
and saved by the green
LED lighting up (3
seconds).
JUMP:
The display shows the
message "ECo" and "oFF".
10. After a short pause of a
few seconds, the machine
returns to normal
operation.
6.5.2 Activating ECO mode
1. Switch the machine off.
2. Ensure that the water tank
is at least half full.
Translation of the original German user manual
PRO 400:
PRO 400:
ENGLISH
JUMP:
JUMP:
JUMP:
43