KLS Martin group SonicWeld Rx Gebrauchsanweisung/Technische Beschreibung Seite 37

Instructions for Use / Technical Description
®
SonicWeld Rx Ultrasonic Unit
To take out the SonicPins Rx
•
®
Pin Rx and take out SonicPin Rx
the sonotrode they can easily be taken out of the clip magazine.
Put the SonicPin Rx
•
respectively.
Apply some pressure to the SonicPin Rx
•
Press foot switch / hand activation only so long until the SonicPin Rx
•
into the drill hole in the desired depth by applying light pressure.
After inserting the SonicPins Rx
3 seconds.
Loosen sonotrode tip after the SonicPin Rx
•
and then remove it.
Press button
•
V. 2.2
®
from the clip magazine: Put sonotrode tips on the Sonic-
®
. As the SonicPins Rx
®
fixed on the sonotrode tip in the drill hole of the plate or the mesh,
®
the tip of the sonotrode should not be moved for at least
again.
®
hold magnetically on the tip of
®
in an axial direction to the drill hole.
®
has solidified by turning it in and axial way
®
has been inserted
37