ACD GRUPPE M2Smart HMI Case Projektierungshandbuch Seite 41

®
Before using the M2Smart HMI Case with a tablet inserted near medical devices (e.g. pacemakers), ask a
doctor or the manufacturer of the medical devices.
®
The M2Smart HMI Case must not be used in potentially explosive atmospheres.
®
Before use, check the M2Smart HMI Case and the connection cable for damage. Damaged parts must be
replaced. Please contact ACD Elektronik GmbH to do this.
®
Damage caused by dropping the M2Smart HMI Case can, for example, lead to loss of the specified IP
protection.
Non-designated use of the interfaces is prohibited.
The device may only be operated by trained specialized personnel.
The hazardous area must be visible from the operating position occupied by personnel.
According to EN ISO 13850, section 4.1, as well as EN 60204-1 section 10.7.1, it must be ensured that no
confusion can occur between an effective and an ineffective HMI handheld operating device.
®
If an M2Smart HMI Case is not in use, store the operating device in a location that is protected from
access.
®
M2Smart HMI Case_Bedien- Projektierhandbuch_Operating Project Engineering Manual_V1.06_de_en 41 / 64