Modify Menu; Key Cut Menu - Keyline Ninja Vortex Bedienungsanleitungen

7.5.0

Modify menu

The MODIFY Menu is used to modify the cut parameters for a key
and it also makes it possible to personalise some characteristics
of the key, according to the client's specific requirements.
How to proceed:
• From the key search sub-menu, select "
• This displays the technical sheet for the selected article
and makes it possible to change some of the key charac-
teristics.
3 4 5 6 7 8
Options displayed:
1. With this button is possible to decode the selected key.
2. This makes it possible to insert the bitting code for the
key directly.
3. This shows the Cutting Type for the selected key.
4. With the left arrow button is possible to scroll the spaces
moving to left direction.
5. With the right arrow button is possible to scroll the spac-
es moving to right direction.
6. With the minus button is possible to decrement the depth
of the highlighted tooth.
7. With the plus button is possible to increment the depth of
the highlighted tooth.
18 Keyline S.p.A.
MODIFY AND CUT
8. This makes it possible to select the depth increase or de-
crease rate when the + or - buttons are pressed. The
available options are: one STEP is either 0.1 mm or 0,01
mm, 1/2 STEP.
9. With this button is possible to reset the modifications
made on the selected tooth.
10. With this button is possible to modify simultaneously all
".
the teeth.
• For further information select "
Note: The " " symbol makes it possible to save the selected
key in the list of bookmarks. See paragraph 6.2.0.
7.6.0

Key cut menu

Once the key to be copied has been searched using the relevant
functions in the Database Menu, the programme will direct the
user to the CUT screen, that makes it possible to duplicate the
desired key.
1
2
9 10
4 5 6
Options displayed:
1. With this button is possible to set the amount of copies
that need to be cut.
2. With this button is possible to save the key.
3. Starts the key cutting process.
4. Shows the references of the cutter to be used
5. Makes it possible to change the cutting speed. The avail-
able materials are: BRASS and CUSTOM, STEEL, ALUMIN-
IUM and SILVER-NICKEL.
6. Shows the jaw to be used to cut the key.
7. Shows the position of the key in the jaw.
NINJA VORTEX
" from the display.
1
2
7 8 9 10
3
Man. cod. B409959FG
8. Shows the jaw stop to be used.
9. Enables/Disables clamp recognition.
10. This makes it possible to enable or disable the head en-
graving function.
• For further information select " " from the display.
Copyright by Keyline - Italy