Search By Article; Setup Menu; Calibrations Menu - Keyline Ninja Vortex Bedienungsanleitungen

5.1.3

Search by article

Selecting the search by article function allows quick access to the in-
formation that refers to a Keyline key article or to other well known
brands.
How to proceed:
• From the MAIN Menu, select: ;
• Input the article code for the Keyline key or other key, then
►
press " ";
• Press button B to view a list of key blanks by other manu-
facturers comparable with the selected one;
• From the operating menu, choose one of this options: DE-
CODE, CODES, DIRECT, MODIFY and ENGRAVING.
Note: From now on, please refer to chapter 7 on page 16.
10 Keyline S.p.A.
MAIN MENU AND SETUP
5.2.0

Setup Menu

The main menu allows access to the set-up menu to regulate
the cutting and reading devices, to update the machine and
use the diagnostic function.
How to access the page:
• From the MAIN Menu, select:
1 2
5 6
Options displayed:
1. For the calibration of the devices on the machine.
2. To access the status check menus of the main devices of
B
the machine.
3. To access the software and database updating menu of
the machine.
4. To consult and set the operating parameters of the ma-
chine.
5. To access the following functions:
• Network Status: displays the status of the connection.
• Keys History: to access the database of duplicated keys.
• Cutter change: guided procedure for cutter change.
• Tracer point change: guided procedure for tracer point change.
• Statistics: keeps track of the total number of cut keys
and of other useful counters.
• Format USB drive: to format the USB drive.
• Date and Time: to set current date and time.
• Restart: restarts the program automatically.
• Reboot: restarts the whole system automatically.
• Machine status: to save or reset the search data.
• Machine data: displays some useful pieces of information,
such as the machine serial number or the software version.
6. To access the user data management menu described in
paragraph 8.1.0 on page 19.
NINJA VORTEX
7. To access all predefined settings for some viewing pa-
rameters, such as the unit of measure, the preferred ve-
hicle brand, the preset region and numbering system.
• For further information select "
5.3.0

Calibrations Menu

Through the CALIBRATIONS Menu it is possible to access the calibra-
tion functions of the machine's devices, in order to obtain the correct
execution of the duplication process.
1 3 4
How to access the page:
• From the SETUP Menu, select:
7
Options displayed:
1. To select the jaw to be installed and to calibrate it.
2. To calibrate the T01 and T02 tracer and to adjust their po-
sition in respect to the X, Y and Z axes.
3. To calibrate the engraver.
4. To regulate the Touch Screen settings.
5. To access the menu that allows the operator to reset the
tracer point and jaws.
• For further information select "
Man. cod. B409959FG
" from the display.
1 2 3 4
5
" from the display.
Copyright by Keyline - Italy