DAB K 36/200 Installationsanweisung Und Wartung Seite 26

 Absorbed power
 Maximum environment temperature:
 Storage temperature:
 Relative humidity of the air:
 Maximum working
pressure:
 Motor construction: in conformity with standards CEI 2-3 pamphlet 1110
 Weight: see plate on package
 Dimensions: see table on page 110
Class AM line fuses: indicative values (Amps)
K 36/200 T; K11/500 T; KE 36/200 T;
K 40/200 T; K 18/500 T; K 55/100 T; KE 40/200 T; KE 55/100 T;
K 55/200 T; K 28/500 T; K 66/100 T; K 90/100 T; KE 55/200 T; KE 66/100T; KE 90/100 T;
K 40/400 T; KE 40/400 T;
K 70/300 T; KE 70/300 T;
K 50/400 T; K 30/800 T; K 40/800 T; K 20/1200 T; KE 50/400 T; KE 30/800 T;
KE 40/800 T;
K 25/1200 T; K 70/400 T; K 80/300 T; KE 25/1200 T; KE 70/400 T; KE 80/300 T
K 50/800 T; K 35/1200 T; K 80/400 T; KE 50/800 T; KE 35/1200 T; KE 80/400 T;
- PG 13,5
Cable clamp:
PG 21

The leads of the supply cables must have a rated section no smaller than that illustrated in the following
table:
5. MANAGEMENT
5.1 Storage
All the pumps must be stored indoors, in a dry, vibration-free and dust-free environment, possibly with
constant air humidity. They are supplied in their original packaging and must remain there until the time of
installation. If this is not possible, the intake and delivery aperture must be accurately closed.
8 Bar (800 KPa):
10 Bar (1000KPa):
12 Bar (1200KPa):
Model
K 36/200 T - K 40/200 T - K 55/200 T - K 11/500 T - K 18/500 T - K 28/500 T - K 55/100 T - K 66/100 T - K
90/100 T - KE 36/200 T - KE 40/200 T - KE 55/200 T - KE 55/100 T - KE 66/100 T - KE 90/100 T
K 40/400 T - K 50/400 T - K 30/800 T - K 40/800 T - K 50/800 T - K 20/1200 T - K 25/1200 T K 35/1200 T -
K 70/300 T - K 80/300 T - K 70/400 T - K 80/400 T - KE 40/400 T - KE 50/400 T - KE 30/800 T - KE 40/800 T
- KE 50/800 T - KE 25/1200 T - KE 35/1200 T - KE 70/300 T - KE 80/300 T - KE 70/400 T - KE 80/400 T
Rated current:
of the appliance
A
> 0,2 and
> 3 and
> 6 and
> 10 and
> 16 and
> 25 and
> 32 and
> 40 and
a
These cables may be used only if their length does not
exceed 2 m between the point in which the cable or its
sheath enters the appliance and its entry in the plug.
b
The cables with the sections indicated in brackets may be
used for mobile appliances if their length does not exceed 2
m.
ENGLISH
see electric data plate
+40°C
-10°C to +40°C
max. 95%
K 36/200 - K 40/200 - K 55/200 - K 11/500 - K 18/500 - K 28/500
- KE 36/200 - KE 40/200 - KE 55/200
K 40/400 - K 50/400 - K 30/800 - K 40/800 -K 50/800
KE 40/400 - KE 50/400 - KE 30/800 - KE 40/800 - KE 50/800 - K
20/1200 - K 25/1200 - K 35/1200 - KE 25/1200 - KE 35/1200 - K
55/100 - K 66/100 - KE 55/100 - KE 66/100
K 90/100 - K 70/300 - K 80/300 - K 70/400 - K 80/400 - KE
90/100 - KE70/300 - KE 80/300 - KE 70/400 - KE 80/400
Rated section
mm²
≤ 0,2
Flat twin tinsel cord
≤ 3
0,5
≤ 6 0,75
≤ 10
1,0 (0,75)
≤ 16
1,5 (1,0)
≤ 25 2,5
≤ 32
≤ 40
≤ 63 10
20
Line fuses
3 x 230V 50/60Hz 3 x 400V 50/60Hz
12
15
20
25
25
40
40
a
a
b
b
4
6
8
8
12
12
16
20
25