Werbung
Verfügbare Sprachen
Verfügbare Sprachen
38) At the end of the operation of raising/
locking the spare wheel, after having
checked the correct positioning of the
wheel under the platform (yellow notch
inside the window on the device), the
spanner must be extracted, taking care
not to turn it in the wrong direction to
facilitate the extraction of the spanner
itself, to prevent the attachment device
from being released and the wheel
assembly not being securely retained.
39) Each time the spare wheel is moved,
check that it is correctly positioned in its
housing under the platform. If it is not
correctly positioned, this could adversely
affect safety.
40) The spare wheel lifting device is
equipped with a clutch safety system for
its own protection; this could activated
if an excessive load is applied on the
manoeuvring screw.
FIX & GO
AUTOMATIC QUICK
TYRE REPAIR KIT
(for versions/markets, where provided)
41) 42) 43)
3) 4)
1)
The Fix&Go tyre repair kit is located
at the front of the vehicle passenger
compartment and includes fig. 30:
30
a spray can (A) of sealant,
complete with transparent filler
hose (E); black pressure top-
up hose (C); sticker (D) marked
"max. 80 km/h", to be affixed in a
position in clear view of the driver
(on the instrument panel) after the
tyre has been repaired
a compressor (F) provided with an
electrical connector (H)
a pair of protective gloves located
in the side compartment of the
spray can
INFLATION PROCEDURE
Proceed as follows:
stop the vehicle in a position that
is not dangerous for oncoming
traffic where you can change the
wheel safely
stop the engine, apply the parking
brake and engage 1
F1A0743
before getting out of the vehicle,
put on the reflective safety jacket
(if required by the regulations in
force). In any case, follow the road
safety laws in force in the country
where you are travelling
st
or reverse
25
Werbung
