Werbung
Verfügbare Sprachen
Verfügbare Sprachen
35)
21
proceed by lifting the vehicle
After lifting the vehicle:
for all versions, reach through
the rear right wheel arch to turn
the screw (A) fig. 22 on the spare
wheel retaining device using the
wrench supplied, assembled
correctly with the extension (B)
fig. 22
turn the tool anticlockwise fig. 23
to lower the spare wheel
continue turning anticlockwise
until the stopping point is reached,
indicated by the stiffening of the
operation or by the click of the
clutch in the device
22
36) 37)
F1A0634
22
23
after unwinding the whole cable
of the spare wheel lifting device,
remove the wheel from the vehicle
undo the retaining knob (D) fig. 24
and free the wheel by sliding out
the support (E)
24
with the tools assembled, undo
F1A0171
the bolts fig. 25 fully and remove
the wheel
F1A0421
25
fit the spare wheel, aligning the
holes with the pins . When refitting
the spare wheel, make sure the
contact surfaces are clean so that
the fastening bolts will not come
loose later
F1A0174
F1A0422
Werbung
