Fiat DUCATO 2022 Kurzanleitung Seite 17

Deactivation
Keep the left stalk in high beam
headlight flashing mode for a few
seconds.
HIGH BEAM
HEADLIGHTS
With the ring in position , push the
left stalk forward. The warning light
switches on in the instrument panel.
Pull the stalk to switch them off.
FLASHING THE
HEADLIGHTS
Pull the left stalk (the position is not
stable). The warning light switches
on in the instrument panel.
DIRECTION INDICATORS
Move the left stalk to the stable
position:
 upwards: activates right direction
indicator
 downwards: activates the left
direction indicator
Warning light or will blink on
the instrument panel.
LANE CHANGE
FUNCTION
If you wish to signal a lane change,
place the left stalk in the unstable
position for less than half a second.
The direction indicator on the side
selected will be activated for 5 flashes
and then go out automatically.
COURTESY LIGHTS
With the ignition device in the STOP
position, the side lights and number
plate lights can be activated for a
time of 30, 60 or 90 seconds. This
function can be regulated from the
display menu or from the Uconnect™
system.
HEADLIGHT ALIGNMENT
CORRECTOR
Contact a Fiat Dealership to have the
headlights' direction checked and
adjusted.
With the ignition device on MAR and
dipped headlights on, press the
and buttons on the panel on the
bottom of the dashboard on the driver
side.
ATTENTION
6) The daytime running lights are an
alternative to the dipped headlights for
driving during the daytime in countries
where it is compulsory to have lights
on during the day; where it is not
compulsory, the use of daytime running
lights is permitted.
7) Daytime running lights cannot replace
dipped beam headlights when driving
at night or through tunnels. The use
of daytime running lights is governed
by the highway code of the country in
which you are driving. Comply with legal
requirements.
HELP CALL
The vehicle is equipped with on-
board assistance functions designed
to provide support in the event of an
accident and/or emergency (HELP).
They are managed via the Uconnect
Box.
The HELP function is activated:
 automatically in the event of a
major collision recorded by the
device aboard the vehicle
15