Herunterladen Diese Seite drucken

Coltri Compressors MCH-6 Bedienungs- Und Wartungshandbuch Seite 21

Werbung

ENGLISH
4
Condensate discharge info plate.
Indicates position of condensate discharge valve. To discharge the
condensate see "7.9 Condensate discharge".
5
Cooling fan direction of rotation info label.
When using the machine for the first time check that the fan rotates in the
direction indicated by the arrow.
If, on a three-phase electric motor compressor, the fan rotates against the
direction of the arrow invert two of the three phases on the main power
lead.
6
a
Special oil info plate
Indicates that only special oils must be used for high pressure
compressors. To choose the right oil see section "7.6 Checking and
changing the lubricating oil".
b
Oil level check info plate
Check lubricating oil level every 5 working hours and change it every
50 working hours. For information on how to check see "7.6 Checking
and changing the lubricating oil". For information on how to change
the oil see "7.6 Checking and changing the lubricating oil".
a
7
Cartridge change info label.
To change the cartridge refer to "7.10 Purifier filter".
8
Maximum working pressure.
MU-MCH6-0419
DEUTSCH
Schild Kondensatablass.
Zeigt die Position der Kondensatablässe an. Für den Kondensatablass siehe
Abschnitt „7.9 Kondensatablass".
Schild Drehrichtung Kühlgebläse.
Bei Erstinbetriebnahme der Maschine überprüfen, dass sich das Kühlgebläse
in der vom Pfeil angegebenen Richtung dreht.
Sollte es sich bei Kompressoren mit Dreiphasen-Elektromotor in der falschen
Richtung drehen, zwei der drei Phasen an der Hauptstromversorgung
umkehren.
a
Schild Spezialöl.
Zeigt
an,
dass
nur
verwendet werden dürfen. Für die Wahl der Öle siehe Abschnitt „7.6
Schmierölkontrolle und -wechsel".
b
Schild Ölstandkontrolle.
Den Schmierölstand alle 5 Betriebsstunden kontrollieren und alle 50
Betriebsstunden das Schmieröl wechseln. Für die Ölkontrolle siehe
Abschnitt „7.6 Schmierölkontrolle und -wechsel". Für den Ölwechsel
siehe Abschnitt „7.6 Schmierölkontrolle und -wechsel".
Schild Patronenwechsel.
Für den Patronenwechsel siehe Abschnitt „7.10 Reinigungsfilter".
Max. Betriebsdruck.
MCH-6
Spezialöle
für
Hochdruckkompressoren
b
21 - 60

Werbung

loading

Diese Anleitung auch für:

Mch-6/shMch-6/sh compactMch-6/srMch-6/sr compactMch-6/emMch-6/em compact ... Alle anzeigen