Continuity Test - Getinge MAQUET Axcel AXL 5001 Technische Beschreibung

IEC 62353 Type:
compatible
control units
Type:
Type:
Type: ....................
The protective earth resistance is to be measured between point
 
Protective earth resistance ≤ 300 mΩ
The continuity test is to be performed between point
 

Continuity test

MEASURING POINT DEPENDING OF THE INSTALLATION
76
Measuring equipment used
Voltmeter S/N: ........................
Luxmeter S/N: ........................
Megohmeter S/N: ........................
S/N: .........................
Electrical safety test
Calibration valid until: ........................
Calibration valid until: ........................
Calibration valid until: ........................
Calibration valid until: ........................
0
and the point
and the point
3 4
Ensure proper calibration of your
measuring equipment before EACH
reading.
0125205 Notice technique / Technical manual / Technische Beschreibung
3
Measured: .................... mΩ
4