Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BFD 3SAP-19N000-U01-LA2-C_ _ _ _ _
Ultrasonic sensors
7
System Functions (continued)
7.4
Variant Configuration
7.4.1
Description
The device variant can be changed either via ISDU with
this parameter or by using the IO-Link Compatibility Mode.
If this parameter is written, the device variant is not
changed immediately but instead after the device is
restarted.
If the device variant is changed via the IO-Link compatibility
mode, the change in this parameter is visible immediately.
This parameter is not changed by a reset.
After a variant changeover, an inconsistent
configuration may occur because there is no
automatic changeover of parameters.
It is therefore recommended that the setup be
done in the following order:
1. Variant setting
2. Activate the variant with a device restart.
3. Check parameters and set valid parameters if
necessary or use Data Storage (see section
2.9 on page 7).
Enables switching between the Smart Sensor Profile Ed. 2
and the Legacy Smart Sensor Profile.
7.4.2
ISDU
Name
Index
Device Variant
0x0055 (85)
Tab. 7-10: Variant Configuration – ISDU
Device Variant
This parameter indicates which variant is currently set.
The following device variants are available:
Value
Meaning
0x0001 (1)
BFD 3SAP-19N000-U01-LA2-C...
0x0002 (2)
BFD 3SAP-19N000-U01-LA2-C...
Tab. 7-11: Variant configuration – Overview of device variants
76
english
Subindex
Access
0
R/W
Length
Data Type
2 bytes
UINT16(ENUM)
Description
Smart Sensor Profile Ed. 2 (BMSP)
Comprehensive Condition Monitoring (CCM)
Data Storage
Default
No
0x0001 (1)
Werbung
